delay ban

How to Spoof HWID

Delay Ban/VAL 5/Tourney Kick

How to RAID0 if you are getting VAL 5 and Kicked from Fortnite/Delay ban

Doing this will require a Windows Reinstall.

Intel: Requires Two Disk Drives. (SSD or HDD)

  1. Create a folder named $WinpeDriver$ and download RAID drivers from your motherboard's website.

  2. Drag the folder into your Windows USB Drive.

  3. Now, follow the RAID guide for your motherboard.

You can also use the one below, which supports the listed motherboards. (Extract to USB)

WinpeDriver

How to set up a RAID array for an Intel chipset

Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu.

Select [SETTINGS] → select [Advanced] → Set [SATA mode] as [RAID/Optane Mode].

Press [F10] → Select [Yes] to save and exit, the PC will restart.

Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu.

Select [SETTINGS] → [Advanced] → select [Intel(R) Rapid Storage Technology].

Select [Create RAID Volume] (Note: All of the data will be wiped, please backup your data.)

Select [RAID Level]: RAID0 or Volume if available.

Select all available disks.

Click [create Volume]

You can see the RAID Volumes have been created at this moment, take a picture to show later in the ticket.

How to set up a RAID array for an AMD chipset

Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu.

Select [Settings] → Click [Advanced] → Set up [SATA mode] as [RAID mode]

Press [F10] → Click [Yes] to save and exit, the PC will restart.

Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu.

Select [SETTINGS] → [Advanced] → select [RAIDXpert2 Configuration Utility].

Select [Array Management]

If the [Create Array] is greyed out, it means the current disk is set in a RAID array already. Please click [Delete Array] to re-create the RAID.

Select [Check All] → Click [Delete Array(s)]

Set [Confirm] as [Enable] → and click [YES]

Note: All of the data will be wiped, please back up your data.

The existing Arrays have been deleted.

Click [Create Array]

Click [Select RAID Level]: RAID0 or Volume if available.

Click [Select Physical Disks]

Select the RAID disks. For example: setup [Physical Disk 0:1:3]& [Physical Disk0:1:7] as [Enable] → Click [Apply Changes]

Select [Create Array]

The RAID volume has been created.

Last updated